Guide
What is a VPN router?
A VPN router is a Wi-Fi router that sends the internet traffic of everything connected to it through a VPN, an encrypted tunnel to somewhere else on the internet. Your laptop, phone, TV or game console joins the router's Wi-Fi like any other network, and the router handles the VPN for all of them. Nothing extra to install on each device.
The short version
- One VPN for every device. A VPN app protects only the device it's installed on. A VPN router covers everything on its Wi-Fi, including devices that can't run a VPN app at all.
- Where the tunnel ends decides what websites see. If it ends at a VPN company's servers, websites see that company's IP address (the address the internet sees your traffic coming from). If it ends at your own home internet connection, websites see your home connection, as if you were at home.
- It isn't magic. Your speed still depends on the Wi-Fi you're on and on where the tunnel ends, and websites can still use other checks besides your IP address.
How a VPN router works
Normally, your devices connect to a Wi-Fi network (a hotel, a cafe, an airport) and their traffic goes straight out onto the internet from there. The network you're on can see which sites your devices reach, and every website sees that network's IP address.
A VPN router sits in between. You connect the router to the local Wi-Fi or a network cable, then connect your devices to the router's own Wi-Fi. The router wraps everything in an encrypted tunnel and sends it to the far end of the tunnel, where it finally goes out onto the internet. To the local network, all of your devices' traffic looks like one encrypted stream it can't read.
The two kinds of VPN router
1. A router connected to a VPN service
The router signs in to a commercial VPN service (the kind you pay a monthly or yearly fee for). The tunnel ends at that company's servers, so websites see an IP address belonging to the VPN company, usually one shared with many of its other customers. Good for privacy on public Wi-Fi, or for choosing which country you appear to be in. Several big VPN services publish guides for setting up a router this way.
2. A tunnel back to your own home
The tunnel ends at a second small router plugged in at your house. Your traffic goes out onto the internet through your own home connection, so websites see your home internet's address, as if you were home. Good when you want your usual home connection while you're away, rather than someone else's.
Our short video shows how a tunnel back to your own home works.
Both kinds encrypt your traffic on the local Wi-Fi. The difference is the last step: whose internet connection your traffic finally comes out of. Our PacketMole vs a privacy VPN page compares the two side by side.
Why people use one
- Lots of devices. A family trip can mean laptops, phones, tablets and a streaming stick. One router covers them all, instead of a VPN app (and login) on each one.
- Devices that can't run a VPN app. Many smart TVs, game consoles and some streaming players (Roku, for example) can't install a VPN app. They can join a VPN router's Wi-Fi.
- Hotel and public Wi-Fi. You set the router up on the local Wi-Fi once, and your devices connect to the router's own network, so they don't each have to join the hotel's.
- Privacy on networks you don't trust. The local network sees encrypted traffic going to one place, not the sites you visit.
- Your own home connection while you're away (the second kind only). Some services expect to see the internet connection you normally use at home: streaming “home network” checks, banking that notices unfamiliar addresses, or an address-based work check. A tunnel back to your home lets your devices use that same connection from wherever you are. The services' own rules and other checks still apply.
The honest downsides
- Speed has limits. Everything travels to the end of the tunnel and back. With a tunnel to your home, speed depends on your home connection's upload speed, the Wi-Fi where you're staying, and the route between them. Video calls, remote desktop and everyday work apps are what PacketMole customers use it for, but no one can promise a fixed speed.
- VPN company addresses get noticed. Commercial VPN addresses come from known data-center ranges and are shared by many users, so some services, including some banks and streaming services, flag them and may challenge or limit them. A home connection's address avoids that particular problem, but no setup can guarantee a website will let you in.
- Doing it yourself takes work. You can build either kind with off-the-shelf routers and free software, but you'll be setting up, updating and troubleshooting it yourself, sometimes from a hotel room far from home. Our build it yourself page walks through what that involves.
- Some networks block VPNs. A hotel, airport or office network can block VPN traffic entirely, and then no VPN router can connect from there.
- A VPN on your device changes what websites see. If a laptop runs its own VPN app, websites see that VPN's address instead. The laptop's VPN still travels through the router's tunnel, so the VPN service itself (a work VPN, for example) sees the connection arriving from your home connection.
Where PacketMole fits
PacketMole is the second kind: a tunnel back to your own home, with the routers already set up for you. It's two small routers, both built on hardware from GL.iNet, a travel-router maker.
- The Home unit plugs into a free network port on your router at home and stays there.
- The Away unit travels with you. Connect it to the hotel or cafe Wi-Fi (or a network cable), and your devices join the Away unit's own Wi-Fi.
The two units find each other through Tailscale, a networking service. During setup you sign in to your own Tailscale account (Tailscale's Personal plan is currently free for personal use), and the printed Quick Start guide walks you through it. Your devices' traffic then goes out onto the internet through your home connection. It's designed to work with home internet that has no public IP address of its own, such as Starlink or T-Mobile 5G Home Internet, though we can't promise every network you visit allows the connection.
If you've tried your own home VPN on Starlink or T-Mobile Home Internet and couldn't reach it, this video explains why.
It costs $349 once. There's no subscription from us and no account with us. See How it works for the details, what's in the box, and the FAQ for speed, setup and compatibility questions.
Which kind do you need?
- Just want privacy on public Wi-Fi, or to appear in another country? A VPN service (on a router or as an app) is the simpler, cheaper choice.
- Want your devices to use your own home connection while you travel? You need a tunnel back to your home, either built yourself or ready-made like PacketMole.
Want your own home connection on the road?
$349 one-time. Free US shipping (ships within the US only). Ships within 2 weeks. 30 days; $50 restocking fee if opened or used.
Secure checkout · Powered by Stripe
GL.iNet and Tailscale are trademarks of their respective owners; PacketMole is not affiliated with or endorsed by them. Tailscale plan details change; check tailscale.com/pricing for the current terms.
See something we got wrong? Email support@packetmole.com.